Yall know.... just rolled a nice phatty .... getting ready to blaze... DAMN!!!! no fire.....
That is bad. Now your searching around, asking people ...too much hassle! I have to constantly buy lighters, cuase I constantly loose them. Thats why I buy cheap lighters (not like the one shown in this post) cause an expensive one will soon be lost like the rest.
Oh and be sure to get your lighter back if you let me use it.... I will steal it... not intentionally, but it will end up in my pocket!!!
click on any lighter image throughout the post for info.
Below is a brief history of the lighter, that super useful device, that smokers can't do without
The lighter was invented in 1816. The first lighter was called "Dobereiner's Lamp" (named after its creator, a German chemist named Johann Wolfgang Dobereiner). But his lighter did not use butane or oil as fuel, it used hydrogen. Needless to say his lighter was not very safe!
Another difference was that these lighters used platinum as the catalyst (used to start the chemical change of fuel to fire) instead of flint, or a Piezoelectric spark (the Piezo spark is explained later). With platinum being so valuable, you can imagine how this lighter was much a luxury of the time. Only highly affluent smokers could afford the first lighters, which is why most smokers used matches until much later.
Although it was an amazing invention, Dobereiner's Lamp was not so convenient because it wasn't built for hands to hold. It was a kind of table lighter, like the piece shown in the image to the right. It was considered a status symbol and the prize of a socialite smoker--as it was quite the conversational piece.
Common smokers mostly used matches until the flint lighter became more popular. By 1908, the flint lighter was refined enough (and small enough) to fit inside a pocket. Special flint made specifically for lighters (ferrocerium) went into mass production at this time. Obviously, flint is a fraction of the cost of platinum. Using platinum as a catalyst faded out and flint took its place. This lit the kindling which would light the fire that fueled rise of the lighter.
The development of lighters accelerated during World War I. Matches were used by soldiers to find their way in the dark. But the intense initial flare of matches gave away their position too easily, and many lives were lost because of this. Hence, the need for combustion without a great initial flare was born. Inventors started improving the design of lighters and by 1918 when the war ended, they were able to be produced somewhat easier.
By the 1920s, right in the middle of the Art-Deco period, smoking became extremely popular. And, lighters were right there to keep up with the trend. Flint wheel lighters were the first lighters to make a mark. A typical 1920s lighter looked like the image to the left, and was probably carried around in the purse of a positively chic woman!
The fuel used in most of the lighters in the 1930s was naphtha, an oily liquid that comes from petroleum. The typical logistics of a lighter from this time was as follows: The fuel reservoir at the bottom of the lighter contained a wick immersed in the fuel. The wick led up to the top where a steel/flint ignition system would spark against the fuel-soaked wick and create a constant flame. The spark was made by the flick of a finger to a rotating wheel of flint, which created friction against a small piece of steel.
In the 1930s-40s, a ground-breaking innovation to the lighter emerged. It's hard to say exactly who conceived of the idea, but Ronson starting producing mass-producing lighters that used butane as a fuel, instead of naphtha. There were three main advantages butane had over naphtha: 1) compressed butane gave the ability to control flame intensity 2) the wick no longer need to be replaced 3) the odor of butane was not as pungent as that of naphtha. To the right is one of the first flint butane lighters made by Ronson.
When butane lighters first came into the market, flint was still used as the ignition system. Because lighter flints inevitably need to be replaced due to wear by friction, it was bothersome to a smoker to have to replace it every once in a while. Lighter manufacturers sought after a more advanced ignition system, to make lighters further appealing...
A technology also started to rapidly develop after the first World War--Piezoelectricity. Like the lighter, Piezoelectricity was invented in the early 1800s, but the full potential of it was only first realized in 1917, by French scientists. They created a device that ultrasonically detected submarines, which used Piezoelectricity to convert one type of energy to another. Ronson used the same Piezoelectric effect used in this machine, to create an igniter for lighters that transforms energy (of pressurized force of quartz crystals) into an electric spark.
Since the late 1950s, when the Piezoelectric spark was introduced, lighters have been used by almost all smokers. Now, there are more lighter manufacturers than ever. There are also many different flame types. Aside from a natural flame, there are now lighters that produce torch and jet flames and even multi-flames.
Today smokers might choose a different flame type as a matter of preference or because of what they're smoking (pipes or cigars). Cigar smokers usually use torch lighters and pipe smokers would probably prefer a natural flame lighter.